-
Activation / Licence / 2
-
Compatibility / Troubleshooting / 7
- FTP connection does not work
- Guest users are unable to log in
- Increasing the disk timeout values under Linux
- Minimum requirements for the HA Cluster version
- Problem connecting to ADS server – Error Message “Domain cannot be reached”
- VMware ESX Server not connecting with euroNAS via iSCSI
- Which hardware RAID controllers are supported?
-
Enterprise Virtualization OS / 12
- Can I assign more than one virtual network to individual VM?
- Can I restore VM-Backup to any eEVOS installation
- Can I watch VM Usage in Realtime?
- How do I create virtual machine?
- How is eEVOS Plus licensed?
- How is Live Migration of running VMs working?
- Installing the paravirtual drivers
- My OS is not on the compatibility list
- Supported Guest Operating Systems
- Virtual Network for the virtual machines
- VM-Backup – which restore options are possible?
- What is “Network Ping Test IP”?
-
Example Configurations / 0
-
Fibre Channel Cluster / 7
- Can I connect FC Ports for mirroring directly between the servers?
- Can I connect FC RAID Array as storage for SAN Cluster?
- Can I use more than one FC Port for providing FC Storage to the clients?
- How should the clients be configured for the SAN Cluster?
- How to configure Citrix Xen for euroNAS SAN Cluster
- Should the FC ports used for server mirror be in separate zone?
- Which FC HBAs are supported by SAN Cluster?
-
General / 12
- Can also iSCSI Targets be synchronised?
- Guest users are unable to log in
- How can I access the NFS shares?
- How can I reach the server if I forget its IP Address?
- How can I replace failed drive on software raid?
- How can I update my euroNAS Software?
- How do I create a fibre channel target?
- Installation media of euroNAS dies ….
- Minimum requirements for the HA Cluster version
- My raid controller is not listed in the hardware compatibility list
- What happens with data if I reinstall euroNAS from scratch ?
- Which features are supported by Server Synchronization
-
HA Cluster / 21
- Can I create more than one Cluster Access IP Address?
- Can I power off and start nodes randomly?
- Can I upgrade from an existing euroNAS Products?
- Do I need a switch for the replication connection between the cluster nodes?
- Do I need to define which IP is permitted to access iSCSI Target?
- How can I improve the reliability of the HA cluster?
- How long does Failover take when using HA Cluster?
- Increasing the disk timeout values under Linux
- Is Active/Active Cluster configuration supported?
- Is vSphere High Availability (HA) supported by HA Cluster?
- Should both servers have identical hardware?
- There is no option to create share or iSCSI Target
- What are hardware recommendations for HA Cluster?
- What does HA Cluster?
- What happens if replication network goes down?
- What is “Cluster Access IP Address”?
- What is “cluster drive”?
- What is “cluster share or iSCSI Target”?
- What is “Network Ping Test IP”?
- What is the difference between corporate and replication network?
- When should I use HA Cluster?
-
Howto / 11
- Connect NFS share on to Citrix Xen Server
- Connecting euroNAS iSCSI Target on Citrix Xen Server
- How can I copy the data from other (non euroNAS) server to euroNAS?
- How can I create a software raid?
- How can I update euroNAS?
- How do I create a fibre channel target?
- How do I initialize the drive?
- How do I install euroNAS?
- How do I join an Active Directory Domain?
- How should I configure server synchronization (replication)?
- Increasing the disk timeout values under Linux
-
Installation / 14
- Can I manually add host names ?
- Guest users are unable to log in
- How can I access the NFS shares?
- How can I reach the server if I forget its IP Address?
- How can I update my euroNAS Software?
- How do I create a fibre channel target?
- How do I initialize the drive?
- How do I install euroNAS?
- Minimum requirements for the HA Cluster version
- My raid controller is not listed in the hardware compatibility list
- Problem connecting to ADS server – Error Message “Domain cannot be reached”
- VMware ESX Server not connecting with euroNAS via iSCSI
- What does license number and activation mean ?
- Which port uses administration interface in euroNAS products?
-
Network / 4
-
Raid / 6
- Can I build RAID spread over several disk controllers ?
- How can I replace failed drive on software raid?
- My raid controller is not listed in the hardware compatibility list
- Supported RAID levels with Software RAID
- What happens with data if I reinstall euroNAS from scratch ?
- Which hardware RAID controllers are supported?
-
Recovering from a system failure / 3
-
Server Synchronisation / 9
- Can also iSCSI Targets be synchronised?
- How can I backup the data locally?
- How can I enable snapshot replication?
- How can I see if the files were replicated correctly?
- How should I configure server synchronization (replication)?
- No shares are shown when creating the synchronisation job
- What actually means Byte-level incremental Replikation?
- What is the advantage of data compression during the synchronisation?
- Where can I find data sheet for server synchronization?
-
VMware XEN Hyper-V / 3