Base Installation
The base installation covers deploying euronas Premium Plus operating system onto the server using the installation ISO. This involves selecting the system disk, completing the install, booting into the platform, and configuring the management network. At this point, the system is up and accessible, ready for the next stage of setup via the GUI.
Install OS onto the dedicated OS Drive
As outlined earlier, the euronas Premium Plus operating system is installed from a de...
Select Language
Once the system has fully loaded, you will be presented with the option to install the eurona...
License
Before installing the euronas Premium Plus operating system, you will be required to accept t...
Operating System Disk Selection
In this example, two drives are visible. The dedicated OS drive is vda (256,000 MB / 256 GB)...
Final Confirmation and Disk Formatting
This is the final confirmation before the selected drive is formatted.Selecting Yes and press...
Installation Progress and Completion
The system may take a short period of time to install euroNAS Premium Plus onto the system di...
Post-Installation Boot Configuration
The base installation is now complete. Ensure the ISO image is no longer mounted and that the s...
Initial Boot and Network Configuration
Once the system has booted, you will be presented with the console prompt screen. If DHCP is ...
1st Time Login
At the user prompt, enter admin (lower case) and press Enter. At the password prompt, ente...
Management Network Configuration
Once you have successfully logged in, you will be presented with the operating system managem...