🇬🇧 HA Cluster User Guide - EN
Introduction
The increasing reliance on digital services places a clear expectation on IT infrastructure it ha...
Hardware Recommendations
Hardware Recommendations The euroNAS HA Cluster is not tied to specific hardware and runs on sta...
Prerequisites
Before starting the installation, it is assumed that the underlying infrastructure and access to ...
Base Installation
The base installation covers deploying the euroNAS HA operating system onto the server using the ...
Install OS onto the dedicated OS Drive
As outlined earlier, the euronas Premium HA operating system is installed from a dedi...
Select Language
Once the system has fully loaded, you will be presented with the option to install the euronas ...
License
Before installing the euronas Premium HA operating system, you will be required to accept the...
Operating System Disk Selection
In this example, one drive is visible. The dedicated OS drive is vda (256,000 MB / 256 GB), a...
Final Confirmation and Disk Formatting
This is the final confirmation before the selected drive is formatted.Selecting Yes and press...
Installation Progress and Completion
The system may take a short period of time to install euroNAS Premium HA onto the system dis...
Post-Installation Boot Configuration
The base installation is now complete. Ensure the ISO image is no longer mounted and that the s...
Initial Boot and Network Configuration
Once the system has booted, you will be presented with the console prompt screen. If DHCP is ...
1st Time Login
At the user prompt, enter admin (lower case) and press Enter. At the password prompt, enter ...
Management Network Configuration
Once you have successfully logged in, you will be presented with the operating system managem...
Cluster Creation
The cluster service is the heart of the euroNAS high-availability storage ecosystem, delivering f...
iSCSI Target Creation
With HA Cluster you can create highly available iSCSI Targets. Should one node fail, the other wi...
Cluster Drive Creation
After the cluster creation you can now create cluster drive. This drive will mirror data between ...
Connecting to the server for the first time
euroNAS is preset to acquire an IP address from a DHCP server. If you connect the monitor to the ...
Network Configuration and Management
euroNAS products support all common 1/10/20/25/40 and 100 Gigabit network cards. You can configur...
Storage Management
Drive Management
In the drive management you can see all your physical drives and initialize them for the use with...
Hardware RAID Management
HA Cluster supports many hardware RAID Controllers. Depending on model you can read the status, c...
Software RAID Management
Software RAID is very cost effective for smaller or less IO intensive applications Some of the f...
Security Settings
User and Group Management
The euroNAS server can check the identity of users by using its internal user / password list. Th...
Active Directory
Authentication via Active Directory Additionally to the local user / group authentication euroNA...
Access control for SMB/CIFS and AFP Shares
For SMB / CIFS and AFP shares you can use following permissions – Local users and groups– Active...
Access control for NFS Shares
For NFS access you can define which IP addresses or networks are permitted to access the share. P...
Access control for iSCSI Shares
For iSCSI Target access you can define which IP addresses or networks are permitted to access the...
ZFS Pool Creation
ZFS pools form the foundation of storage within the euroNAS platform. A ZFS pool aggregates one o...