Base Installation
The base installation covers deploying the euroNAS HA operating system onto the server using the installation ISO. This includes selecting the system disk, completing the installation, booting into the platform, and configuring the management network. At this stage, the system is operational and accessible, ready for the next phase of configuration via the GUI.
If a cluster deployment is planned, it is recommended to prepare both nodes at this stage using the same documented installation process.
Install OS onto the dedicated OS Drive
As outlined earlier, the euronas Premium HA operating system is installed from a dedi...
Select Language
Once the system has fully loaded, you will be presented with the option to install the euronas ...
License
Before installing the euronas Premium HA operating system, you will be required to accept the...
Operating System Disk Selection
In this example, one drive is visible. The dedicated OS drive is vda (256,000 MB / 256 GB), a...
Final Confirmation and Disk Formatting
This is the final confirmation before the selected drive is formatted.Selecting Yes and press...
Installation Progress and Completion
The system may take a short period of time to install euroNAS Premium HA onto the system dis...
Post-Installation Boot Configuration
The base installation is now complete. Ensure the ISO image is no longer mounted and that the s...
Initial Boot and Network Configuration
Once the system has booted, you will be presented with the console prompt screen. If DHCP is ...
1st Time Login
At the user prompt, enter admin (lower case) and press Enter. At the password prompt, enter ...
Management Network Configuration
Once you have successfully logged in, you will be presented with the operating system managem...